[ms50 title]

[owners manual]

3. The modules and their functions  ^


[addamp module]
- adding amplifier

[one] [two] [three] CHANNEL 1, 2, 3 LEVEL
Use these control knobs to mix signals together. When these are turned up all the way, there will be a one-to-one relationship between the input and output level.
[four] [five] [six] CHANNEL 1, 2, 3 INPUT
Each of these inputs can handle any kind of signal from DC (0Hz) through the audio frequency range. If you connect several synthesizers together (MS-10, MS-20, etc. connected to the MS-50), you can also use these to mix their output signals.
[seven] ADDING AMPLIFIER OUTPUT (DC mixer output)
This output jack provides the mixed signal determined by the channel level control knob settings.

| ^ | module menu | previous module | next module